- Solid top with vents and cable entry port
- Base with open center and cable entry ports
- Removable side access covers with key locks (opens from top)
- Rear access cover with key lock (opens from top)
- Tempered glass front door with key lock
- Two-pair fully adjustable rails tapped 10-32 with printed RU scale
- Grounding stud
- Leg levelers
- Beveled corners
- Charcoal Grey textured powder epoxy finish
- Pilot Point screws with captive washers
- Rack Space: 35U
- Height: 65.43 in.
- Width: 22.31 in.
- Depth: 24.00 in.
- Load Capacity: 980 lbs.
- TAA compliant
- BAA compliant
- EIA/TIA compliant
- USA-certified steel
- Made in USA
The EIA/TIA-compliant 19″ equipment rack shall be Lowell Model No. LDR-3524 which shall measure 22.31″W x 24.00″D x 65.43″H with 27U panel space. Construction shall be fully welded 16-gauge steel with top/base reinforced at load-bearing junctions and finished with a charcoal-grey textured coating. Load capacity shall be 980 lbs. The rack shall include a tempered glass front door with key lock, recessed rear access cover with key lock, removable side panels with key locks (keyed the same as the rear access cover), two-pairs of 11-gauge steel rails with mounting holes tapped 10-32 and rack unit increments printed on EIA spacing, and a steel top with vents and hole with grommet. The base shall feature a center opening, two holes with grommets, a grounding stud, and four leg levelers. The rack shall be manufactured in the USA using USA-certified steel. It shall be Trade Agreement Act (TAA) compliant and Buy American Act (BAA) compliant.
