ACSP-2002-RPC-HW advanced surge suppression with remote power control, hardwired

Advanced Multi-Stage Surge Suppression, (20A) Outlets | ACSP-2002-RPC-HW - CLOSEOUT

Name: Advanced Multi-Stage Surge Suppression, (20A) Outlets | ACSP-2002-RPC-HW - CLOSEOUT
SKU: ACSP-2002-RPC-HW
Availability: InStock

Special Pricing - While Supplies Last

$502.80 MSRP

CLOSEOUT | Call 800-325-9660 for Availability
Recommended Alternative: ACSP-2002-RPC

Advanced Surge Protection provides multiple layers of protection for equipment on a single circuit. Featuring Triple Clamping Redundancy (TCR), it protects equipment from power surges up to 72,000A when fully active (three LEDs light when fully protected). This model features two NEMA 5-20R receptacles and a remote power input terminal, which allows it to be controlled by a remote switch, low-voltage sequencer or control system with maintained contact closure. Universal mounting brackets. Ten year limited warranty.

Add to Favorites

Compare

Suppresses line to neutral with no ground contamination.
TCR technology defeats surges up to 72,000 amps
Two (20A) NEMA outlets spaced for power supplies. Patented plate rotates 90 degrees for front or side access.
Front LEDs provide visual system status.
Universal mounting brackets allow versatile installation.
6-ft. non-metallic flexible conduit with pigtail leads for hardwired connection.
Chassis: 1.75 in. x 6 in. x 9 in.
Remote Power Control (RPC) capability by a low voltage sequencer, switch or control system that provides a maintained dry contact closure.
10 year warranty

Spec Sheet: 1813-ACSP2002RPCHW

TAA compliant
BAA compliant
ETL Listed (conforms to UL1449-4)
ANSI C62.41 compliant
USA-certified steel
Assembled in the USA with global components

The 20A single-circuit surge protector shall be Lowell model ACSP-2002-RPC-HW with one duplex outlet. It shall protect the line to neutral without ground wire contamination. It shall be capable of protecting electronic equipment from transient voltages, spikes and surges up to 72,000A and have a response time of less than 5 nanoseconds. It shall include mounting brackets, two 20A outlets mounted on a plate that can be rotated 90º for front or side access, LED status indicators and a 6 ft. flexible conduit with pigtail leads. It shall include remote power control capability (by low-voltage sequencer, switch or control system that provides a maintained dry contact closure, not included). It shall be ETL Listed and conform to UL1449-4 and ANSI C62.41.