LTS series 1x2 lay-in tile ceiling speaker

8 inch Dual Cone Lay-in Tile Ceiling Speaker with 25/70V Xfmr, 1x2 Frame with 7-in. Square Grille, Enclosure

Name: 8 inch Dual Cone Lay-in Tile Ceiling Speaker with 25/70V Xfmr, 1x2 Frame with 7-in. Square Grille, Enclosure
SKU: LTS-810-72-BB
Availability: InStock

LTS-810-72-BB

$148.80 MSRP

Quick-install speaker system for suspended tile ceilings features an 8-inch dual cone driver with dual voltage (25V/70V) transformer, 1x2 white frame with 7-inch square grille pattern, and enclosure. The patented assembly features an integral T-bar support that quickly replaces half of a non-tegular 2x2 ceiling tile or one-fourth of a non-tegular 2x4 ceiling tile.

Add to Favorites

Compare

Driver (810): 8 in. 15W dual cone driver with 10 oz. magnet, frequency response of 54Hz-11.6kHz (±6dB) and 50Hz-20kHz (±6.6dB), and average sensitivity of 97.9dB measured 1W/1M. Conical dispersion 95 degrees.
Transformer: Dual voltage 25V/70V transformer with taps at .3, .6, 1, 2, 5.5W.
Grille (1 x 2 Frame): Square 7″ grille pattern with white powder coat finish
Enclosure (0.147 cu.ft.): Steel backbox with speaker leads that exit through a metal clamp for fast connection. Black.
Mounting Aid: Patented integral T-bar supports neighboring cut non-tegular ceiling tile. Restraint tab and hole for two-cable code compliance (cables not incuded).

Spec Sheet: 2440-LTS-Series

TAA compliant
BAA compliant
USA-certified steel
Made in USA

The loudspeaker for suspended lay-in tile ceilings (non-tegular, flush) shall be Lowell Model No. LTS-810-72-BB. The 1×2 assembly shall replace one-half of a 2×2 or one-fourth of a 2×4 ceiling tile and shall include an integral T-bar to support adjacent (cut) ceiling tile. Each speaker shall include a factory-mounted driver with transformer mounted to steel grille frame with white powder-coat finish. The driver shall be 8″ dual cone with 15W power rating. It shall have a magnet weight of 10 ozs., frequency response of 54Hz-11.6kHz (±6dB); 50Hz-20kHz (±6.6dB) and average sensitivity of 97.9dB measured 1W/1M. The dual voltage transformer (25V/70V) shall feature primary taps at 0.3, 0.6, 1, 2 and 5.5W. The system shall include a steel backbox (0.147 cu.ft. volume) with leads exiting through a metal clamp, and it shall have a smooth-black powder-coat finish. The assembly shall be manufactured in the USA using USA-certified steel, and it shall be Trade Agreement Act (TAA) and Buy American Act (BAA) compliant.