OS-150TW: In/Out Speaker 150W Wht - Image 2

8 inch Two-Way Indoor Outdoor Speaker | OS-150TW - CLOSEOUT

Name: 8 inch Two-Way Indoor Outdoor Speaker | OS-150TW - CLOSEOUT
SKU: OS-150TW
Availability: InStock

Special Pricing - While Supplies Last

$272.60 MSRP

CLOSEOUT | Call 800-325-9660 for Availability Recommended Alternative: OS-150TW

Model OS-150TW two-way speaker is for installations requiring pattern control and can be used for indoor or protected outdoor applications. It features a horn loaded compression driver that controls high frequency dispersion for longer throws or systems using live microphones. The back of the speaker has an 8ohm/transformer selector switch. The unit includes a UV-resistant polypropylene enclosure and powder coated aluminum mesh grille. The U-bracket allows 90-degree rotation. Connections are made to terminals protected by weather-resistant cover and rubber grommet. White.

Add to Favorites

Compare

High-fidelity music
For indoor or protected outdoor installations
For systems requiring longer throws or using live microphones

Driver: Woofer is 8 inch polymer-coated paper composite cone with cloth surround. Frequency response 65Hz–20kHz (±6dB). Average sensitivity 91.0dB at 8ohms (1W/1M). 150W. 80˚H x 80˚V conical dispersion. Input selector switch. Rear cover plate. 16 in. x 9 in. x 8.3 in. (without bracket).
Transformer: 25V/70V/100V
Enclosure: Weather-resistant, UV-resistant polypropylene. Paintable. White.
Grille: Weather and UV-resistant powder coated aluminum mesh grille. White.
Mounting Aids: Adjustable U-shaped bracket for horizontal or vertical installation allows speaker to rotate 90 degrees, depending on install orientation. White.

Spec Sheet: 1702-OS150TW
Instructions: Install-OS150
Revit Models: OS-150TW

The speaker for indoor or protected outdoor applications shall be Lowell Model OS-150TW, which shall have a horn loaded compression driver and 150W power rating with screwdriver adjustable switch for direct 8ohm or distributed 70V, 25V or 100V application. It shall have a frequency response of 65Hz–20kHz (±6dB) and a sensitivity of 91.0dB measured 1W/1M. The housing shall be molded plastic and mesh aluminum grille with white finish. The assembly shall include an adjustable U-bracket for vertical or horizontal installation. Each assembly shall weigh 18 lbs. and measure 16.3 in.x 9 in. x 10 in. with included bracket. Housing shall include 1/4 in.–20 threaded inserts.