30W Reentrant Horn with Xfmr, Enclosure, Bracket

Name: 30W Reentrant Horn with Xfmr, Enclosure, Bracket
SKU: LH-30TA
Availability: InStock

LH-30TA

$271.80 MSRP

Re-entrant horn LH-30TA with high efficiency 30W compression driver is for indoor or outdoor use applications requiring signaling or public address with high intelligibility, such as schools, recreational facilities, warehouses, distribution centers, parking facilities and commercial buildings. All-metal construction with beige finish. Optional wiring compartment covers for IP66 rating. A 15W horn is also available (here).

Priced each. Order in multiples of 6.

Add to Favorites

Compare

Performance: Clear loud paging and tone signaling
Driver: 30W compression
Transformer: For 25V, 70V or 100V systems. Screwdriver-adjustable tap selector and screw terminal connections in rear. Integral strain relief and plastic cover.
Enclosure: Weather-resistant assembly is all-metal construction with durable beige epoxy finish.
Mounting Aids: Universal swivel mounting bracket
Ships ready for installation
Diameter: 10.37 in.
Depth: 10.63 in.
Installation: Indoor/outdoor surface-mount with two-wire hook-up to rear access screw terminals
Operating Temperature Range: -40˚F to 158˚F
Average Sensitivity (1W/1M): 118.1dB

Spec Sheet: 1170-LH30TA

Unit is IP66 rated (IEC 60529) for water/dust-resistance when optional wiring compartment cover is used (order separately)
Country of Origin: Taiwan

The horn shall be Lowell model LH-30TA, which shall be a re-entrant design with a high efficiency 30W compression driver, round bell and universal swivel-style base. Power rating shall be 30 watts continuous. Frequency response shall be 411Hz-4.0kHz (±6dB) with a sensitivity of 118.1 log average (1W/1M) 132.9dB maximum SPL (calculated based on power rating and measured sensitivity). Dispersion shall be 40 degrees conical (2kHz Octave Band). Impedance shall be 2500, 1300, 670, 330, 169, 90, 45 ohms. Horn shall include a 25/70/100V transformer with screwdriver selectable taps. Taps for 25V use shall be: .25, .48, .93, 1.9, 3.7, 6.9 and 13.9 W. Taps for 70V use shall be: 2, 3.8, 7.5, 15, and 30W. Taps for 100V use shall be: 4, 7.7, 15, and 30W. Transformer connections shall be protected by a plastic cover with strain relief. The horn assembly shall measure 10.37″ dia. x 10.63″ deep and shall be weather-resistant.

LHA-30C: IP66 wiring compartment cover, threaded conduit
LHA-30G: IP66 wiring compartment cover, waterproof grommet strain relief for cable