CT830AT870: 8in Coax Speaker w xfmr - Image 2

8 inch Coaxial Speaker with 70V 8W Transformer

Name: 8 inch Coaxial Speaker with 70V 8W Transformer
SKU: CT830AT870
Availability: InStock

CT830A-T870

$121.00 MSRP

Model CT830A-T870 includes an 8-inch 20W coaxial driver with post-mounted coaxially positioned tweeter and 70V 8W transformer. For quality paging, public address and background music. Order grille and enclosure separately.

Priced each. Order in multiples of 16

Add to Favorites

Compare

Driver: 8-inch 20W coaxial. High frequency speaker with first order high pass filter, ceramic magnets (12 oz. LF, 2.1 oz. HF) and permanently aligned voice coils.
Frame: 20-gauge stamped steel with zinc-plated finish.
Mounting Bolt Circle: 7.625 in.
Transformer: 70V with taps at 1, 2, 4, 8W
Assembly Mounting Depth: 3.30 in.
Assembly Dispersion Angle: 80 degrees conical
Assembly Frequency Response: 53Hz–14.3kHz (±6dB) and 44Hz–20kHz (±7.1dB)
Assembly Average Sensitivity: 97.1dB

Spec Sheet: 1436-CT830AT870

Assembled in U.S.A. with global components
Meets or exceeds industry standards

The high performance 8″ coaxial with mounted transformer shall be Lowell Model CT830A-T870 which shall be of the coaxial type having electrically independent high and low frequency transducers and power rating of 20 watts RMS. The low frequency section shall have an 8 in. diameter cone; the high frequency section shall have a 3 in. diameter cone. A built-in electrical crossover network shall be employed to accomplish proper frequency selection between the two drivers. Crossover frequency shall be at 4000Hz. The low frequency voice coil shall have a 1 in. diameter and operate in a magnetic field derived from a strontium ferrite (ceramic) magnet with nominal weight of 12 oz. The high frequency voice coil shall have a 0.57 in. diameter and operate in a magnetic field derived from a strontium ferrite ceramic magnet with nominal weight of 2.1 oz. Voice coil impedance shall be 8ohms. The speaker shall have a structurally reinforced, stamped 20-gauge steel frame with 8.062″ overall dia. and eight obround holes equally spaced at 45 degrees on a 7.625 in. diameter mounting bolt circle. External metal parts shall be zinc-plated to resist rust and corrosion. The speaker shall have a mounted transformer with primary taps at 1, 2, 4, 8W @70V.The assembly shall be capable of producing a uniform audible frequency response over the range 53Hz-14.3kHz (±6dB) and 44Hz-20kHz (±7.1dB) with dispersion angle of 80 degrees @2000Hz (-6dB).Average sensitivity shall measure 97.1dB (SPL at 1W/1M). Assembly mounting depth shall not exceed 3.3in.