LGR-3522: Gangable Rack
35U x 22"D gangable equipment rack with adjustable rails is fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions. NOTE: This size has been discontinued and is available in limited quantity.
• Rack Space: 35U
• Overall Height: 67.375 in.
• Overall Width: 23.06 in.
• Overall Depth: 22.00 in.
• Useable Depth: 19.34 in.
• Configurable top has 7U opening for 19 in. panels (includes solid closure panels)
• Open frame with multiple 2 in. holes on sides for cable runs between racks
• Open front (optional door)
• Rear door with top/bottom vents and key lock
• One-pair fully adjustable rails tapped 10-32 (printed RU scale)
• Cable Management: multiple lacing points, holes, knockout panels
• Pilot Point screws with captive washers
• Grounding stud
• Threaded inserts (for optional leg levelers)
• Beveled corners
• Black wrinkle powder epoxy finish
• Load capacity 3150 lbs.
COMPLIANCE & CERTIFICATION
• EIA/TIA compliant
• UL 2416 Listed
• RoHS compliant
• Certified U.S. steel
• Made in Missouri, U.S.A.
• Spec Sheet: 1871-LGR3522
• Revit Models: LGR Series
The EIA/TIA/RoHS compliant, gangable rack shall be Lowell Model No. LGR-3522. Overall measurements shall be 67.375”H x 22”D x 23.06”W with panel space of 35 rack units. Load capacity shall be 3,150 lbs. The rack shall include a recessed rear door with vents and key lock; top with 7U opening and compound knockouts; open base with grounding stud; one pair adjustable mounting rails with printed RU increments; knockout panels with combination knockouts above/below rear door; blank project panel below rear door; and provisions to mount an optional surface-mount front door (ordered separately). The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black wrinkle powder epoxy finish. It shall be listed to UL 2416.
OPTIONS (order separately)
• LFD-35: Solid steel front door with key lock
• LFD-35P: Smoked plexiglass front door with key lock
• LFD-35FV: Fully-vented steel front door with key lock
• LGR-3522SP: Pair of solid side panels with recessed handles
• RRD-35: Extra pair of mounting rails tapped 10-32
• LL: Leg levelers