LER-2127-LRD: Enclosed Rack
21U x 27"D stand-alone floor rack with adjustable rails is fully welded 16-gauge steel with 14-gauge base, reinforced at all load-bearing junctions.
• Rack Space: 21U
• Overall Height: 42.875 in.
• Overall Width: 23.06 in.
• Overall Depth: 27.00 in.
• Useable Depth: 24.34 in.
• Welded top with vents
• Welded sides with vents
• Open front (optional door)
• Open back
• One-pair fully adjustable rails tapped 10-32 (printed RU scale)
• Cable Management: Multiple lacing points, knockout panels
• Pilot Point screws with captive washers
• Grounding stud
• Threaded inserts (for optional leg levelers)
• Beveled corners
• Black wrinkle powder epoxy finish
• Load capacity 500 lbs.
COMPLIANCE & CERTIFICATION
• EIA/TIA compliant
• UL 2416 Listed
• RoHS compliant
• Certified U.S. steel
• Made in Missouri, U.S.A.
• Spec Sheet: 1470-LER2127
• CAD drawings: LER-2127
• Revit Models: LER Series
The EIA/TIA/RoHS compliant, stand-alone floor rack shall be Lowell Model No. LER-2127-LRD. Overall measurements shall be 42.875"H x 27"D x 23.06"W with panel space of 21 rack units. Load capacity shall be 500 lbs. The rack shall include welded side panels with vents, steel top with vents, open base with grounding stud, one pair adjustable front mounting rails with printed RU increments, combination knockouts above and below rear opening, and provisions to mount an optional surface-mount front door or rear rails (ordered separately). The rack shall be manufactured in the U.S.A. with certified U.S. steel and have a black wrinkle powder epoxy finish. It shall be UL Listed to UL2416.
OPTIONS (order separately)
• LFD-21: Solid steel front door with key lock
• LFD-21P: Smoked plexiglass front door with key lock
• LFD-21FV: Fully-vented steel front door with key lock
• LRD-21FV: Fully-vented rear door with key lock.
• RRD-21: Extra pair of mounting rails tapped 10-32
• LMB-27: Mobile base
• LSB-27: Stationary base
• LSSB-27: Shallow stationary base
• LL: Leg levelers