RACKS: Wall Cabinets
  RACKS : Wall Cabinets and Wall Mount Shelves
UL Listed Sectional Wall Cabinet with 14D Mounting Section

DOWNLOADS:

L250 Series wall cabinets with 19W x 14D mounting section:
12" – 61" Models with 4.7D backbox, 14D mounting section, solid front door, adjustable rails and panel hardware. Select 7-35RU sizes. Models without front door are also available so that an optional perforated or Plexiglas front door may be ordered. Smaller Models (7-21RU) are suitable for UPS shipment.





UL Listed Sectional Wall Cabinet with 18D Mounting Section

DOWNLOADS:
L253 Series wall cabinets with 19W x 18D mounting section:
12" – 61" Models with 4.7D backbox, 18D mounting section, solid front door, adj rails and panel hardware. Select 7-35RU sizes. Models without front door are available so that an optional perforated or Plexiglas front door may be ordered. Smaller Models (7-16RU) are suitable for UPS shipment.


Pull & Turn (slide-out rotating) Rack
DOWNLOADS:
LPT4-19 Series 19W x 19D Frame System (4 Slides):
Mounting system for built-in wall and millwork applications
Includes bottom base with turntable and 4 heavy-duty slides for 300lb load, removable rack base, 6 corner post rails, side stiffeners, 6 cable lacing panels, front security panel.

LPT4-19 Series Specs
LPT Series Install
LPT4-23 Series 19W x 23D Frame System (4 Slides):
Mounting system for built-in wall and millwork applications
Includes bottom base with turntable and 4 heavy-duty slides for 300lb load, removable rack base, 6 corner post rails, side stiffeners, 6 cable lacing panels, front security panel.

LPT4-23 Series Specs
LPT Series Install
LPT2-19 Series 19W x 19D Frame System (2 Slides):
Mounting system for built-in wall and millwork applications
Includes bottom base with turntable and 2 heavy-duty slides for 150lb load, removable rack base, 6 corner post rails, side stiffeners, 6 cable lacing panels, front security panel.

LPT2-19 Series Specs
LPT Series Install

Tilt-out Wall Cabinet
DOWNLOADS:

L87-5R - RECESSED wall cabinet 29W x 29H x 4D + 1.8D trim frame. Includes: recessed backbox, 3RU cabinet section with frame, adj rails, 2 hold-down brackets, device cutouts with cover plates for low-voltage decora-style devices, and panel mounting hardware.


• L87-5S - SURFACE wall cabinet 29W x 29H x 5.8D
Includes: Same as above with surface backbox.





Tilt-out Wall Cabinet with Dampers

 
DOWNLOADS:

L83-5S - SURFACE wall cabinet (24W x 32H x 6D):
Includes: adju
stable cabinet frame, oil-filled dampers (for controlled lowering), top compartment with door, single lock for top and bottom compartments (optional thumb latch available), removable shelf, side cable raceway, bottom cable area with cover, integral 1-gang E.O. box mounted in bottom, wrinkle powder epoxy finish (Network Grey).


L83-5R - RECESSED wall cabinet (27W x 32H x 4D, 1.81 projection):
Adjustable cabinet frame, oil-filled dampers (for controlled lowering), top compartment with door, single lock for top and bottom compartments (optional thumb latch available), removable shelf, side cable raceway, bottom cable area with cover, integral 1-gang E.O. box mounted in bottom. wrinkle powder epoxy finish (Network Grey).



L-83 AD

 

 

L83-5R recessed wall cabinet

 


UL Listed Wall Cabinets 16D
DOWNLOADS:
• L55 Series - WELDED wall cabinet (19W x 16D): solid back with keyhole mounting, vented sides, solid front door, fixed mounting rails, 4 or 7RU.







RACKS : Wall Mount Shelves
Folding Wall Shelf
DOWNLOADS:
• FS18 Series - FOLDING shelf (14, 16, 20D). Innovative design is completely assembled for cost-effective installation - ships flat in a compact carton for economical shipping / convenient warehousing. Shelf supports up to 100 lbs. Available in 14", 16" or 20" depth.





Welded Wall Shelf
DOWNLOADS:
• L14-21 - HEAVY-DUTY shelf (21W x 15H x 17D): ideal for supporting electronics such as amplifiers and recorded music systems in educational, commercial and retail applications where a full-size cabinet is not practical.




RACKS : Rack Mount Shelves
Rackmount Shelves with Security Panel
Rackmount Shelf with Security Panel
 
DOWNLOADS:

L15E Series shelf (19W x 10D): multi-purpose assembly features welded front closure panel for security and a bottom that is punched for easy screw-mount installation of chassis-style audio accessories.

Enclosed security shelf is punched to mount RPC Series remote power controls and other chassis-style devices. Rugged 16-gauge US steel with solid front panel. Supports up to 50 lbs. 2RU or 3RU panel space height. Durable black powder epoxy finish.