WALL-MOUNT Racks and Shelves

Pivoting:

LWBR: wall-mount (with base)

The new, improved LWBR provides solid support and convenient access to equipment loaded in wall-mount applications. The cabinet opens and closes easily using a single-release loop-style grasp with slam-latch closure. It pivots smoothly on stainless steel ball transfers set into the base. The base provides additional 4 rack units for electronic equipment or an optional utility drawer. Open top features integral rack rail with E.I.A. spacing to support optional 19" E.I.A. fan panels. Key-lock on front secures cabinet to backbox while allowing side-by-side installations. Welded 16-gauge steel construction with durable black wrinkle powder epoxy finish. specs | video

Swing-out:

LWR: wall-mount (sectional)

Two-part rack includes 4.7” deep backbox and 14” or 18” deep mounting section. Backbox: 10” square opening, removable knockout panels (for conduit and wireless), lacing points, and provisions to attach board-mounted accessories. Two, key-style, side locks are keyed differently than (optional) front door. Mounting Section: 1-pair of adjustable rails, integral rails top and bottom, (4) knockouts (0.5”) for wireless, vented sides, and panel hardware. Black wrinkle powder epoxy finish. Backbox and mounting section are packaged separately.  video | 19"D specs | 23"D specs

LWSRF: wall-mount (swing-out, fixed-rail)

Wall-mount rack with swing-open access is an economical design featuring fixed-position front mounting rails. Ideal for applications that won't need to reposition equipment front-to-back. video  |  specs

What's the difference ?

Stationary:



LWRF: wall-mount (fixed-rail)

Economical wall rack for schools, small offices and retailers. Houses 19” wide electronics in small system installations. Welded 16-ga. steel rack includes 1-pair of fixed mounting rails, vented sides and separate wall bracket with mounting slots and knockouts. Durable, black wrinkle powder epoxy finish. Optional front door for security.  specs

Shelves:

WS: wall-mount shelf

Heavy-duty, welded shelf formed from 16-gauge steel has a load capacity of 200 lbs. when properly installed. Shelf features rear keyhole slots and combination knockouts (.5-.75”) on top, bottom and sides. Black powder epoxy finish. specs

FS: flat-ship shelf

Ready-to-install wall shelf ships flat and folds out for use — no assembly required. Load capacity: 100 lbs. Mounts on 16” stud centers. Formed steel construction, without welds, allows shelf to be mounted in either direction (up or down). Center opening for wire access or placement over outlets or fixtures. Pre-punched cable lacing and accessory mounting holes. specs

Tiltout:

LWTR: wall-mount, tilt-out

Available with surface or recessed backbox. Backbox (29” x 29”) for surface model (LWTR-3S) is flush with keyhole slots on 16” centers. Backbox (26” x 26”) for recessed model (LWTR-3R) requires 4” depth. Both styles mount equipment 19”W x 5.25”H x 17.5”D. Backbox and frame are packaged separately. Network grey, powder epoxy finish. specs

LWTCR: wall-mount, tilt-out (dampers)

Features oil-filled dampers for smooth operation and backbox (surface or recessed). Top compartment with pocket door stores accessory devices or mounts (optional) 19" rack device panels on hinged mount for easy service access. Network grey powder epoxy finish. Available in surface-mount or recessed. specs | video