Technical How to Order
   
News Find a Rep
   
Literature Contact Us
   
About Lowell SPEC search
   
    HOME ORDER Online
Lowell Rack Power Audio    

Wall-mount Shelves:

   

WSL wall shelf


WSL-1814: light duty wall shelf

• Holds up to 40 lbs. when properly installed.

• Ideal for in-closet wiring applications.

• Mounting holes on 16" stud centers

• Rear obrounds for cable management

• Black powder epoxy finish

• Made in the USA with 100% certified US steel

• Optional

Single fan kit

WALL RACK WALL RACK WALL RACK made in usa rack EIA rack
A & E —
The shelf for wall-mount installation shall be Lowell Model WSL-1814. It shall have mounting holes on 16” stud centers and include two rear obrounds for cable routing. Vents shall include provisions to mount an optional single fan kit (FW1-KIT or FW1-KITT, ordered separately). The shelf shall be constructed of 16-gauge US steel, formed and bolted. It shall have a smooth black powder epoxy finish and support a load up to 40 lbs. when properly mounted.
Model No.
Load Capacity (lbs)
OA Depth (in)
OA Height (in)
OA Width (in)
Specs
WSL-1814
40
14
3.47
18

WS2117 wall shelf

WS-2117: heavy duty wall shelf

• Welded shelf holds up to 200 lbs. when properly installed

• 16-gauge steel

• Rear keyhole slots

• Combination knockouts on top, bottom and sides

• Black powder epoxy finish

• Made in the USA with 100% certified US steel

WALL RACK wall mount rack made in usa rack EIA rack  
A & E —
The shelf for wall mount installation shall be Lowell Model WS21-17. The shelf shall have keyhole slots on 8" and 16" centers for wall mount installation. Wiring shall be accomplished via .5"-.75" combination knockouts on the top, bottom, and sides. An integral .5" return shall be provided on the front edge to help retain equipment. The shelf shall be constructed of 16-gauge US steel, welded and finished in smooth black powder epoxy. It shall support up to 200 lbs. when properly mounted.
Model No.
Load Capacity (lbs)
OA Depth (in)
OA Height (in)
OA Width (in)
Specs
WS-2117
200
17
15
21

AV racks

FS Series:  hinged wall shelf, ships flat

• Ready-to-install steel shelf folds out for installation; no assembly required.

• Formed steel construction without welds allows installation either end up.

• Mounts on 16" stud centers

• Center opening for wire access or placement over outlets or fixtures.

• Pre-punched cable lacing and accessory mounting holes. 

• Made in USA with certfied US steel

flat ship shelf flat ship shelf flat ship shelf made in usa rack EIA rack
A & E —
The wall shelf shall be Lowell Model _______. The shelf shall require no field assembly and shall measure 8.19"H x 18.22"W x _____"D in open/service position and fold flat for shipping or storage. Wire management shall be provided on the top surface using two oblong cutouts measuring 2.5"L x 1.25"W. Top shall also include a retaining lip. Shelf shall support up to 100 lbs. when properly mounted (mounting hardware by others). Keyhole mounting slots on 16" centers are provided in the rear panel. Rear panel shall also have a large center opening for mounting the shelf over existing fixtures and side openings to accommodate single-gang stud-mounted conduit boxes. Rear panel shall be pre-punched for mounting accessories and lacing cable. Shelf shall be finished in black powder epoxy.
Model No.
Load Capacity (lbs)
OA Depth (in)
Useable Depth (in)
OA Height (in)
OA Width (in)
Specs
FS18-14
100
14
14
8.19
18.22
FS18-16
100
16
16
8.19
18.22
FS18-20
100
20
20
8.19
18.22

HOME

Need pricing? jump to Customer Center

 

© 2010-13 Lowell Manufacturing Co., 100 Integram Dr., Pacific, Mo. 63069-3476 USA ph. 800.325.9660, 636.257.3400