Technical How to Order
   
News Find a Rep
   
Literature Contact Us
   
About Lowell SPEC search
   
    HOME ORDER Online
Lowell Rack Power Audio    

Stand-alone Racks:

   

AV rack with sides


LER Series
:
enclosed rack

• All welded stand-alone rack

• Adjustable front mounting rails (tapped 10-32)

• Welded sides with vents at top/bottom

• Recessed, vented rear door with key lock (also available without rear door, see specs)

• Combination knockouts (top/rear)

• Black wrinkle powder epoxy finish

• UL Listed

• Made in the USA with 100% certified U.S. steel

• Optional Accessories

LFD Series front door

RRD Series mounting rails

Stationary or mobile base

Fan panels

Other rack accessories

Rackmount Power

The LER is also available with an accessory bundle (LER-BAV Series) or with pre-installed accessories (LER-IAV Series).

AV RACK RACK for electronics AV rack made in usa rack EIA rack UL Listed rack

A & E —
The UL Listed (Standard 1678), E.I.A. compliant rack shall be Lowell Model __________. It shall measure 23.06"W x ________"D x ______"H with a racking space of ________ rack units. The rack shall be fully welded 16-gauge certified U.S. steel with seamless side-frame construction and 14-ga. steel bottom reinforced at all load-bearing junctures. It shall include vented side panels, vented recessed rear door with key-lock, and vents above and below the open front. The rack shall feature ______ (1-pr. or 2-pr.) of adjustable mounting rails, tapped 10-32. Rack top shall include compound knockouts for conduit size (2"-1") and (1.5"-1"), and (.5") knockouts for BNC wireless antennas. It shall have a top opening with integral E.I.A. rack rail to accept optional 19" wide accessories. Two steel panels shall be included (as shipping stiffeners). The open bottom shall include provisions for optional leg levelers and holes for optional anchor bolts (by others). The rear shall have removable knockout panels above and below the door including (.5") knockouts for wireless antennas and compound knockouts for conduit size (.75"-.5") and (1.5"-1"). Rack finish shall be black wrinkle powder epoxy.
Model No.
Load Capacity (lbs)
RU
OA Depth (in)
Useable Depth (in)
OA Height (in)
OA Width (in)
Specs
LER-1822
3150
18
22
19.34
37.63
23.06
LER-2122
3150
21
22
19.34
42.88
23.06
LER-2422
3150
24
22
19.34
48.13
23.06
LER-3522
3150
35
22
19.34
67.38
23.06
LER-4022
3150
40
22
19.34
76.13
23.06
LER-4422
3150
44
22
19.34
83.13
23.06
 
LER-1827
3150
18
27
24.34
37.63
23.06
LER-2127
3150
21
27
24.34
42.88
23.06
LER-2427
3150
24
27
24.34
48.13
23.06
LER-3527
3150
35
27
24.34
67.38
23.06
LER-4027
3150
40
27
24.34
76.13
23.06
LER-4427
3150
44
27
24.34
83.13
23.06
 
LER-2432
3150
24
32
29.34
48.13
23.06
LER-3532
3150
35
32
29.34
67.38
23.06
LER-4032
3150
40
32
29.34
76.13
23.06
LER-4432
3150
44
32
29.34
83.13
23.06

stand alone rack

LBR Series: basic floor rack

• Economical, stand-alone floor rack has fixed-position front mounting rails for equipment that won't need to be repositioned deeper into the rack.

• Front and top rails tapped 10-32

• Rear Z-angle (to mount optional power strip) plus large area in rear for cables

• Welded sides with top/bottom vents (vents will accept optional fan kit FW1-KIT)

• Recessed rear door with vents (also available without the rear door, see spec sheet)

• Combination knockouts (top/rear)

• Black wrinkle powder epoxy finish

• Made in the USA with certified U.S. steel

• Optional Accessories

LFD Series front door

– Mounting rails (see spec sheet)

– Stationary or mobile base (see spec sheet)

19" fan panels

Rackmount Power

standalone floor rack economy rack low cost rack made in usa rack EIA rack

A & E —
The EIA-compliant rack shall be Lowell Model No. _______. It shall measure 23.06"W x ____"D x ___"H with a racking space of ____ rack units. The rack shall be fully welded 18-ga. certified U.S. steel with seamless side-frame construction and 16-ga. steel bottom reinforced at all load-bearing junctures. It shall include vented/welded side panels, vented/recessed rear door with key lock, vents above and below the open front, one-pair of fixed-position front mounting rails (tapped 10-32), and a Z-angle towards the rear. It shall have top and rear knockouts. The top opening shall have integral EIA rail (tapped 10-32) to mount optional 19" wide accessories. The open bottom shall include a grounding stud in left rear corner, provisions for optional leg levelers, and holes for optional anchor bolts (by others). Finish shall be black wrinkle powder epoxy.
Model No.
Load Capacity (lbs)
RU
OA Depth (in)
Useable Depth (in)
OA Height (in)
OA Width (in)
Specs
LBR-2122
800
21
22
19.34
40.95
23.06
LBR-2422
800
24
22
19.34
46.20
23.06
LBR-3522
800
35
22
19.34
65.45
23.06
LBR-4022
800
40
22
19.34
74.20
23.06
LBR-4422
800
44
22
19.34
81.20
23.06
 
LBR-2127
800
21
27
24.34
40.95
23.06
LBR-2427
800
24
27
24.34
46.20
23.06
LBR-3527
800
35
27
24.34
65.45
23.06
LBR-4027
800
40
27
24.34
74.20
23.06
LBR-4427
800
44
27
24.34
81.20
23.06

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

LHR Series: host rack

• Two-part design has exterior cabinet with welded sides and interior rollout, rotating rack.

• Interior rack can be removed from external cabinet for shop wiring. 

Post-style mounting rails tapped 10-32

• Compound knockouts for cables

• Made in USA with 100% certified U.S. steel

• Optional Accessories

– Front door (see specs)

– Rear access cover (see specs)

Fan panels

Rackmount Power

Miscellaneous accessories

host rack host rack HOST RACK made in usa rack EIA rack

A&E —
The host rack shall be Lowell Model _______ with panel space of ______ and overall depth of ___. The two-part rack shall be comprised of an exterior welded enclosure and a pull-out internal rack that is connected to an inner platform caster base with stainless steel ball transfers capable of supporting 750 lbs. The enclosure shall have vented sides, open front, open back, and 10U EIA top opening with top closure panels and top knockouts for conduit and wireless antennas. The enclosure shall include a ground wire to the internal rack and have provisions for anchoring. The internal rack shall be a steel assembly with post-style 10-32 tapped mounting rails, side and rear braces. It shall be mounted to the caster base and pull out from the enclosure to provide free rotation to access rear connections. The rack/caster base assembly shall be capable of disengaging from the enclosure for shop wiring and testing.
Model No.
Load Capacity (lbs)
RU
Depth Ext (in)
Depth Useable (in)
OA Height Ext (in)
Width Ext (in)
Specs
LHR-2432
750
24
32.88
26
53.86
24
LHR-3532
750
35
32.88
26
73.27
24
LHR-4432
750
44
32.88
26
89.02
24
 
LHR-3542
750
35
42.88
36
73.27
24
LHR-4442
750
44
42.88
36
89.02
24

relay rack or network rack

LRR Series: relay rack

• 19" relay rack for voice/data cables where full access to electronics is required.

• 3"W vertical channels (11-ga. steel); holes tapped 10-32 on EIA mounting centers

• Base and top angle supports are two-piece aluminum construction

• Base has four drilled holes to secure to floor for code compliance

• Ships unassembled

• Made in USA

RELAY RACK network rack networking rack  

A&E —
The relay rack shall be Lowell Model ___________ with a 15-inch deep base and vertical panel space of ____________. Rack shall ship unassembled and shall include two 3 inch wide, 11-gauge steel vertical channels with mounting holes tapped 10-32 on E.I.A. mounting centers, a two-piece aluminum base, a two-piece aluminum top, assembly and panel mounting hardware. The base shall be equipped with holes to secure the rack to the floor where specified by code. The assembly shall be finished in black powder epoxy paint.
Model No.
RU
OA Depth (in)
OA Height (in)
OA Width (in)
Specs
LRR-3815
38
15
72
20.25
LRR-4515
45
15
84
20.25

Also see slim-frame racks, seismic-certified racks

RACK ACCESSORIES

HOME

Need pricing? jump to Customer Center


© 2010-13 Lowell Manufacturing Co., 100 Integram Dr., Pacific, Mo. 63069-3476 USA ph. 800.325.9660, 636.257.3400