products

LPTR Series: Pull and Turn Rack

Specs   |   CAD Drawings   |   Photos   |   Accessories

The LPTR pull & turn rack series provides convenient slide-out access to rackmounted equipment stored in cabinetry or custom millwork. The rack slides forward on (two or four) base rails, then rotates for easy access to the back of equipment, wires and cables. Removable base can be mounted flush or recessed. Made in the USA with certified U.S. steel. Smooth black powder epoxy finish. Ships unassembled. 10-30 rack units. 

  • Removable base can be mounted flush or recessed up to 1.75 in. [44.45mm] to allow room for equipment protrusions.
  • When equipment is mounted and wired, secure assembly with screws through front security panel.
  • To service equipment, remove the security panel, slide rack forward, push button to release the lock, then rotate the rack until it locks securely at 60 or 90 degrees for servicing
  • Six cable lacing bars
  • Corner post rails, tapped 10-32, have a printed RU scale to facilitate gear-mounting
  • Ships unassembled (2 cartons) 
  • Distributor stocking option (see below): the base can be purchased separately from rail sets for efficient inventory management. 1 (19 in. or 23 in. D) base + 1 rail set (any height) = 1 rack.USA Flag

share

Model
No.
Load Capacity
lbs. [kg.]
RU*Overall Depth
in. [mm]
Usable Depth
in. [mm]
Overall Height
in. [mm]
Overall Width
in. [mm]
Spec
Sheet
LPTR2-1019 125  [56] 10 19.22  [488] 19.00  [483] 20.08  [510] 19.13  [486] 1035
LPTR2-1219 125  [56] 12 19.22  [488] 19.00  [483] 23.58  [599] 19.13  [486] 1035
LPTR2-1419 125  [56] 14 19.22  [488] 19.00  [483] 27.08  [688] 19.13  [486] 1035
LPTR2-1619 125  [56] 16 19.22  [488] 19.00  [483] 30.58  [777] 19.13  [486] 1035
LPTR2-2119 125  [56] 21 19.22  [488] 19.00  [483] 39.33  [999] 19.13  [486] 1035
LPTR2-2419 125  [56] 24 19.22  [488] 19.00  [483] 44.58  [1132] 19.13  [486] 1035
               
LPTR4-1019 250  [113] 10  19.22  [488] 19.00  [483] 20.08  [510] 19.13  [486] 1036
LPTR4-1219 250  [113] 12  19.22  [488] 19.00  [483] 23.58  [599] 19.13  [486] 1036
LPTR4-1419 250  [113] 14  19.22  [488] 19.00  [483] 27.08  [688] 19.13  [486] 1036
LPTR4-1619 250  [113] 16  19.22  [488] 19.00  [483] 30.58  [777] 19.13  [486] 1036
LPTR4-2119 250  [113] 21  19.22  [488] 19.00  [483] 39.33  [999] 19.13  [486] 1036
LPTR4-2419 250  [113] 24  19.22  [488] 19.00  [483] 44.58  [1132] 19.13  [486] 1036
LPTR4-2819 250  [113] 28  19.22  [488] 19.00  [483] 51.58  [1310] 19.13  [486] 1036
LPTR4-3019 250  [113] 30  19.22  [488] 19.00  [483] 55.08  [1399] 19.13  [486] 1036
               
LPTR4-1023 200  [90] 10  23.23  [590] 23.00  [584] 20.08  [510] 19.13  [486] 1037
LPTR4-1223 200  [90] 12  23.23  [590] 23.00  [584] 23.58  [599] 19.13  [486] 1037
LPTR4-1423 200  [90] 14  23.23  [590] 23.00  [584] 27.08  [688] 19.13  [486] 1037
LPTR4-1623 200  [90] 16  23.23  [590] 23.00  [584] 30.58  [777] 19.13  [486] 1037
LPTR4-2123 200  [90] 21  23.23  [590] 23.00  [584] 39.33  [999] 19.13  [486] 1037
LPTR4-2423
200  [90] 24  23.23  [590] 23.00  [584] 44.58  [1132] 19.13  [486] 1037
LPTR4-2823 200  [90] 28  23.23  [590] 23.00  [584] 51.58  [1310] 19.13  [486] 1037
LPTR4-3023 200  [90] 30  23.23  [590] 23.00  [584] 55.08  [1399] 19.13  [486] 1037

*One rack unit (RU) = 1.75 in or 44.45 mm

DISTRIBUTOR STOCKING OPTIONS
Model No.DescriptionRU*Overall Depth
in. [mm]
Load Capacity
lbs [kg]
Carton Wt.
lbs. [kg]
LPTR-19B2 Base with 2 slides -- 19 [489] 125 [57] 57 [26]
LPTR-19B4 Base with 4 slides  -- 19 [489] 250 [113] 63 [29]
LPTR-23B4 Base with 4 slides -- 23 [590] 200 [91] 68 [31]
LPTR-RRTC10 Rail set and hardware  10 -- -- 10 [5]
LPTR-RRTC12 Rail set and hardware  12 -- -- 11 [5]
LPTR-RRTC14 Rail set and hardware  14 -- -- 12 [6]
LPTR-RRTC16 Rail set and hardware  16 -- -- 14 [6]
LPTR-RRTC21 Rail set and hardware  21 -- -- 17 [8]
LPTR-RRTC24 Rail set and hardware  24 -- -- 18 [8]
LPTR-RRTC28 Rail set and hardware  28 -- -- 21 [10]
LPTR-RRTC30 Rail set and hardware  30 -- -- 23 [10]