POWER: 19" Rackmount Panels

ACR-1507: economical 15A 1U power panel with 2 switched and 5 unswitched outlets. Includes 9' attached cord. ETL-Listed. specs  Note: This unit is also available with hooded or gooseneck lights. Click here.

ACR-1509: 15A 1U power panel with 5 switched and 4 unswitched outlets and 9' cord. ETL-Listed. specs

ACSPR-1509: 15A 1U power panel with 5 switched and 4 unswitched outlets and 9' cord. Features advanced surge suppression (GSA GradeA–Mode1–Class1 endurance, UL1449-2 and ANSI C62.41 compliance). ETL-Listed. specs

ACSPR-1509-VTE: 15A 1U power panel with 5 switched and 4 unswitched outlets and 9' cord. Features advanced surge suppression (GSA GradeA–Mode1–Class1 endurance, UL1449-2 and ANSI C62.41 compliance) and over/under circuitry with auto reset that turns all receptacles off when line voltage exceeds 140V or drops below 100V. ETL-Listed. specs

U181RL: 15A 1U power panel with (4 duplex) rear switched outlets, front on/off rocker switch, pilot light and downward deflecting lamp to illuminate equipment mounted below unit, includes 6' cord. specs Limited Quantities (discontinued model). Click here to see new light panel models.

U181RL-LC:15A 1U power panel with (4 duplex) rear switched outlets, front on/off rocker switch, pilot light and downward deflecting lamp to illuminate equipment mounted below unit, includes 15' cord. specs Limited Quantities (discontinued model). Click here to see new light panel models.

L184: 15A power panel; 2U blank front with 4 rear-mounted duplex outlets. Pigtail leads. UL-Listed. specs

L184-TVSS: 15A power panel; 2U blank front with 4 rear-mounted duplex outlets. Pigtail leads. Includes transient voltage surge suppression to meet UL1449-2. UL-Listed. specs

ACR-2009: 20A 1U power panel with 5 switched and 4 unswitched outlets and 9' cord. ETL-Listed. specs

ACSPR-2009: 20A 1U power panel with 5 switched and 4 unswitched outlets and 9' cord. Features advanced surge suppression (GSA Grade A–Mode1–Class1
endurance, UL1449-2 and ANSI C62.41 compliance). ETL-Listed. specs

ACSPR-2009-VTE: 20A 1U power panel with 5 switched and 4 unswitched outlets and 9' cord. Features advanced surge suppression (GSA Grade A–Mode1–Class1
endurance, UL1449-2 and ANSI C62.41 compliance) and over/under circuitry with auto reset that turns all receptacles off when line voltage exceeds 140V or drops below 100V. ETL-Listed. specs

Remote-controls
(contact closure):

RPC-4CD: 15A 19" rackmount panel with remote control, 2U blank panel in front and 4 (15A) duplex outlets in back. Single circuit. Includes 6' cord. ETL-Listed. specs

ACSPR-RPC1-1509 (rocker switch) or ACSPR-RPC1-1509K (key switch): 15A 19" 1U rackmount panel with remote control for 6 switched outlets and 3 unswitched outlets and 9' cord. Remote power control (RPC) circuitry for 6 outlets allows on/off switching by contact closure. Rear termination blocks are provided for remote switches, external triggers and an alarm interface (for use where mandated by fire code). Includes advanced surge suppression (GSA GradeA–Mode1–Class1 endurance, UL1449-2 and ANSI C62.41 compliance) and over/under circuitry with auto reset that turns all receptacles off when line voltage exceeds 140V or drops below 100V. ETL-Listed. specs

RPC-4MC: 15A 19" rackmount panel with remote control, 2U blank panel in front and 4 duplex outlets in back. Single circuit. Includes 6' metal clad whip. ETL-Listed. specs

ACSPR-RPC1-2009 (rocker switch) or ACSPR-RPC1-2009K (key switch): 20A 19" 1U rackmount panel with remote control for 6 switched outlets and 3 unswitched outlets with 9' cord. Remote power control (RPC) circuitry for 6 outlets allows on/off switching by contact closure. Rear termination blocks are provided for remote switches, external triggers and an alarm interface (for use where mandated by fire code). Includes advanced surge suppression (GSA GradeA– Mode1–Class1 endurance, UL1449-2 and ANSI C62.41 compliance) and over/under circuitry with auto reset that turns all receptacles off when line voltage exceeds 140V or drops below 100V. ETL-Listed. specs

Remote-controls with Sequencing:

ACR-SCS4-1509 (rocker switch) or ACR-SCS4-1509K (key switch): 19" 1U rackmount panel with remote control, alarm interface and 4-step sequential power. Features 6 switched and 3 unswitched outlets and 9' cord. Rear termination blocks are provided for remote switches and an alarm system interface (for use where mandated by fire code). ETL-listed. specs

ACSPR-SCS4-1509 (rocker switch) or ACSPR-SCS4-1509K (key switch): 19" 1U rackmount panel with remote control, alarm interface and 4-step sequential power. Features 6 switched and 3 unswitched outlets and 9' cord. Rear termination blocks are provided for remote switches and an alarm system interface (for use where mandated by fire code). Includes advanced surge suppression (GSA GradeA–Mode1–Class1 endurance, UL1449-2 and ANSI C62.41 compliance). ETL-listed. specs

ACR-SCS4-2009-RT2 (rocker switch) or ACR-SCS4-2009K-RT2 (key switch): 19" 1U rackmount panel with remote control, alarm interface and 4-step sequential power. Features 6 switched and 3 unswitched outlets and 9' cord. Rear termination blocks are provided for remote switches, external triggers and an alarm system interface (for use where mandated by fire code). Includes 2 dry contact closures (steps 5 and 6) for triggering remote power control units (RPC series-not included). ETL-listed. specs

ACSPR-SCS4-2009-RT2 (rocker switch) or ACSPR-SCS4-2009K-RT2 (key switch): 19" 1U rackmount panel with remote control, alarm interface and 4-step sequential power. Features 6 switched and 3 unswitched outlets and 9' cord. Rear termination blocks are provided for remote switches, external triggers and an alarm system interface (for use where mandated by fire code). Includes 2 dry contact closures (steps 5 and 6) for triggering remote power control units (RPC series-not included). Includes advanced surge suppression (GSA GradeA–Mode1–Class1 endurance, UL1449-2 and ANSI C62.41 compliance). ETL-listed. specs

Low-voltage Sequencers:

SCS-4R (rocker switch) or SCS-4RK (key switch): 19" 1U rackmount power panel with sequencers provides time-delayed activation/deactivation of equipment that’s connected to remote power controls. 4 control outputs. Each output can activate equipment connected to a maximum of 10 remote power controls (RPC-series, not included). Each output also includes separate auxiliary relay for sequential operation of other devices. Includes variable time delay, LED status indicators, UL-Listed power supply, and screw terminal interface for life safety systems. specs

SCS8R-ASM (rocker switch) or SCS8RK-ASM (key switch): 19" 1U rackmount power panel with sequencers provides time-delayed activation/deactivation of equipment that’s connected to remote power controls. 8 control outputs. Each output can activate equipment connected to a maximum of 10 remote power controls (RPC-series, not included). Each output also includes separate auxiliary relay for sequential operation of other devices. Includes variable time delay, LED status indicators, UL-Listed power supply, and screw terminal interface for life safety systems. In addition, unit includes an alternate sequence mode (rear programmable DIP switch that allows user to bypass selected outlets to sequentially activate a portion of the system—useful for smaller events like rehearsals). specs