Loadcenter with Sequencer:

1-phase / 100A Loadcenter w/8-step Sequencer:

Description: Single-phase, 100A loadcenter with 8-step sequencer provides one-switch control of circuit breakers for sequential powering of system components. Sequencing options include: (1) full system sequencing, or (2) partial system sequencing (ASM) to bypass select outputs (ideal for rehearsals). Interfaces to life safety alarm system. UL-Listed. installation manual | specs

Model No.: ACLC-100-20-SC248ASM

System Includes:
• Cutler Hammer loadcenter (1-phase, 100A, 20-space, 20-circuit)
• Sequencer with alternate sequence mode controller (ASM)
• Two remote switches
• One remote ASM switch
• LED status display module (Decora)
• Control transformer
• Snap-in bushings, wire ties

1-phase / 200A Loadcenter w/8-step Sequencer:

Description: Single-phase, 200A loadcenter with 8-step sequencer provides one-switch control of circuit breakers for sequential powering of system components. Sequencing options include: (1) full system sequencing, or (2) partial system sequencing (ASM) to bypass select outputs. Interfaces to life safety alarm system. UL-Listed. installation manual | specs

Model No.: ACLC-200-30-SC248ASM

System Includes:
• Cutler Hammer loadcenter (1-phase, 200A, 30-space, 40-circuit)
• Sequencer with alternate sequence mode controller (ASM)
• Two remote switches
• One remote ASM switch
• LED status display module (Decora)
• Control transformer
• Snap-in bushings, wire ties

3-phase / 125A Loadcenter w/8-step Sequencer:

Description: Three-phase, 125A loadcenter with 8-step sequencer provides one-switch control of circuit breakers for sequential powering of system components. Sequencing options include: (1) full system sequencing, or (2) partial system sequencing (ASM) to bypass select outputs. Interfaces to life safety alarm system. UL-Listed. installation manual | specs

Model No.: ACLC-3P-125-30-SC248ASM

System Includes:
• Cutler Hammer loadcenter (3-phase, 125A, 30-space, 42-circuit)
• Sequencer with alternate sequence mode controller (ASM)
• Two remote switches,
• One remote ASM switch
• LED status display module (Decora)
• Control transformer
• Snap-in bushings, wire ties

3-phase / 225A Loadcenter w/8-step Sequencer:

Description: Three-phase, 225A loadcenter with 8-step sequencer provides one-switch control of circuit breakers for sequential powering of system components. Sequencing options include: (1) full system sequencing, or (2) partial system sequencing (ASM) to bypass select outputs. Interfaces to life safety alarm system. UL-Listed. installation manual | specs

Model No.: ACLC-3P-225-42-SC248ASM

System Includes:
• Cutler Hammer loadcenter (3-phase, 225A, 42-space, 42-circuit)
• Sequencer with alternate sequence mode controller (ASM)
• Two remote switches
• One remote ASM switch
• LED status display module (Decora)
• Control transformer
• Snap-in bushings, wire ties

Sequencer (only):



8-step Sequencer:

Description: Eight-step sequencer provides one-switch control of circuit breakers for sequential powering of system components. Sequencing options include: (1) full system sequencing, or (2) partial system sequencing (ASM) to bypass select outputs. This sequencer is included with the loadcenter systems listed above. Order this unit if an additional sequencer is needed or if it is to be installed at a remote location. specs

Model No.: ACSC-248-ASM

Features:
• Controls up to 24 circuits with 8-steps (3-circuits per step)
• Low-voltage contact closure allows system to interface with head-end control systems.
• Install directly to loadcenter or at remote location.
• Provides time-delayed activation/deactivation of equipment connected to loadcenter circuits.
• UL-Listed

Circuit Breakers:



20A / 1-pole Standard Breaker:

Description: 20A / 1-pole standard (stab-mount) breaker. specs

Model No.: ACB-20

20A / 1-pole Remote Breaker:

Description: 20A / 1-pole remote breaker with control cable that plugs into sequencer. specs

Model No.: ACRB-20-1

20A / 2-pole Remote Breaker:

Description: 20A / 2-pole remote breaker with control cable that plugs into sequencer. specs

Model No.: ACRB-20-2

30A / 1-pole Remote Breaker:

Description: 30A / 1-pole remote breaker with control cable that plugs into sequencer. specs

Model No.: ACRB-30-1

30A / 1-pole Remote Breaker:

Description: 30A 2-pole remote breaker with control cable that plugs into sequencer. specs

Model No.: ACRB-30-2