POWER: Advanced Surge Suppression

Jump to Rackmount Power Panels

COMPAC™:



High performance, low-profile, compact surge suppressor (9" x 6" x 1.75") suppresses line to neutral with no ground contamination. TCR™ technology defeats surges up to 72,000A and provides excellent EMI/RFI filtering.Multiple mounting options—under counters, in racks, on shelves—using included brackets. 15A and 20A units feature patented (US Patent #D535178S) rotating outlet plates that can be turned 90-degrees to quickly change orientation of outlets from front to side access. 10-year warranty, ETL-Listed, UL1449 3rd edition compliant, • ANSI C62.41 compliant

HARDWIRED:
30A: hardwired with standard or IG outlets: spec
20A: hardwired with standard or IG outlets and optional over/under protection, remote control, or ground transient filter (GTF): spec

CORDED:
20A: attached cord and choice of over/under protection (VTE) or remote power control capability (RPC) spec
15A: detachable cord and choice of over/under protection (VTE) or remote power control capability spec

Optional Mounting Ears: (ACC-1ME) steel mounting ears allow COMPAC box-style units to mount in standard 19" rackmount format. (bottom photo shows mounting ears attached to COMPAC)

COMPAC®-Stic:



Low-profile compact stick with advanced surge suppression uses TCR™ technology to defeat surges up to 72,000A and provides excellent EMI/RFI filtering. ETL-Listed. UL1449-2 compliant. ANSI C62.41 compliant. Multiple mounting options using minimal space—behind flat screens, under counters, in racks, on shelves—using included brackets. 12" x 2" x 2". 10-year warranty.

CORDED: 15A detachable cord with NEMA 5-15P plug. spec

Optional Mounting Panel: (ACS-MP) enables the COMPAC-Stic to mount in 19" EIA format on inside or outside of rack or on third rail set inside rack with outlets facing up, down or sideways. Ideal for use with LVR, LCR, LLR or LPTR-series racks where space may be limited. Black aluminum. Made in USA.

Ground Transient Filter (GTF):

AC-GTF20-IG: ETL-recognized filtering device (for 15A or 20A circuits) to be added to power conditioning installations. Kit includes slim-profile GTF filter, 2 isolated ground duplex outlets and wire nuts. Installs in series with ground wire (in isolated circuits) to protect equipment from high-frequency ground transients caused by ground faults, atmospheric conditions or other discharges on the ground. Per NEC requirements, the GTF filter does not impede 60Hz fault current. Can be used as a kit in conjunction with surge suppressors or factory installed (see GTF models). Note regarding grounding and bonding of electrical or electronic systems: Lowell strongly recommends compliance with all applicable sections of the National Electrical Code (NEC) and local building codes. specs

Surge Suppressors
for stand-alone or loadcenter use:

ACSP-30-series: New 30A assembly is available with one, two or three circuit modules installed in a 14"W x 14.5"H x 4"D enclosure with screw terminal outputs, knockouts on all sides, assorted bushings to protect wiring, front cover, and an end cover kit for use in stand-alone applications. The front cover is punched to expose each module's three LEDs to provide visual circuit status without opening the device. For use as a stand-alone unit or with an AC loadcenter. specs

ACSP20-series: 20A multi-circuit surge suppressor (14"W x 14.5"H x 4"D) with screw terminal outputs, knockouts on all sides and a cover plate that’s punched to expose (3) LEDs for circuit status indication without opening the box. For use as stand-alone surge suppressor or in conjunction with an AC loadcenter to provide surge protection to specific circuits. More than 1 unit can be connected to a single loadcenter for large installations. Suppresses line to neutral without ground contamination. Proprietary TCR™ technology defeats surges up to 72,000A and provides excellent EMI/RFI filtering. 10-year warranty. ANSI C62.41 compliant. ETL-Listed. specs

ACSP20-GTF-series: 20A multi-circuit surge suppressor (14"W x 14.5"H x 4"D) with screw terminal outputs, knockouts on all sides and a cover plate that’s punched to expose (3) LEDs for circuit status indication without opening the box. For use as stand-alone surge suppressor or in conjunction with an AC loadcenter to provide surge protection to specific circuits. More than 1 unit can be connected to a single loadcenter for large installations. Suppresses line to neutral without ground contamination. Proprietary TCR™ technology defeats surges up to 72,000A and provides excellent EMI/RFI filtering. Each circuit also includes ground transient filter (GTF). 10-year warranty. ANSI C62.41 compliant. ETL-Listed. specs