AUDIO: 12/10 Inch Speakers & Accessories: Systems


AUDIO : 12/10 Inch Speakers & Accessories : Drivers

	250W Consultant's Choice Compression Coaxial Driver	DOWNLOADS:
	• 12Q250 12 inch (250W) 70Hz - 20kHz +/-6dB, 100.3dB avg SPL Model 12Q250 driver is a premium component in the iMount Q-Series high quality, consultant-choice speaker systems. See 12" Systems. The 250-watt 12-inch driver features a robust motor structure with a 77oz. magnet and a 4-inch edgewound aluminum voice coil. The 5.3-inch mylar dome tweeter features a 42oz magnet and a 1.75-inch voice coil for an exceptional combination of power handling and efficiency. A built-in crossover network with a fourth-order high-pass and fourth-order low pass filter accomplishes proper frequency division between the two drivers. Frequency response extends down to 70Hz, and sensitivity is a highly efficient 100.3dB at 1watt, 1 meter. See Ease 4.0 and Ease ASCII info for driver in 3.9 cu.ft ported enclosure on Technical Info page.

	150W Pro-Performance Compression Coaxial Driver	DOWNLOADS:
	• 12P150 12 inch (150W) 30Hz - 20kHz +/-5dB, 96dB avg SPL Model 12P150 is the largest of the P-Series high output, high quality pro'mercial speakers. This 150-watt 12-inch assembly features a robust motor structure with a 38oz. magnet and a 2-inch voice coil wound on a Kapton former. The compression driver tweeter is coaxially mounted behind the woofer and provides increased power handling with greater efficiency than a conventional dome tweeter. A built-in crossover network with a third-order high-pass and 2nd-order low pass filter accomplishes proper frequency division between the two drivers. Frequency response extends down to 40Hz, and sensitivity is a highly efficient 96dB at 1watt, 1 meter. Order as a driver only or ready to install in Lowell's iMount^TM systems - see 12" systems. See Ease 4.0 and Ease ASCII info for driver in iMount IM12P System on Technical Info page.

	125W Pro-Performance Compression Coaxial Driver	DOWNLOADS:
	• 10P125 10 inch (125W) 34Hz - 20kHz +/-6dB, 96dB avg SPL Model 10P125 is part of the P-Series high output, high quality pro'mercial speakers. This 125-watt 10-inch assembly features a robust motor structure with a 38oz. magnet and a 2-inch voice coil wound on a Kapton former. The compression driver tweeter is coaxially mounted behind the woofer and provides increased power handling with greater efficiency than a conventional dome tweeter. A built-in crossover network with a 2nd order high-pass and 2nd order low pass filter accomplishes proper frequency division between the two drivers. Frequency response extends down to 34Hz, and sensitivity is a highly efficient 96dB at 1watt, 1 meter. Order as a driver only or ready to install in Lowell's iMount systems - see 10" systems. See Ease 4.0 and Ease ASCII info for driver in iMount IM10P System on Technical Info page.

	100W Coaxial Driver with 60W Transformer • 12E100-T60 12-inch High-quality, economical, coaxial driver/transformer package, engineered to provide clear music and voice reproduction in commercial venues that have medium height ceilings (up to 20 feet) and medium ambient noise levels such as retail stores, hotel lobbies, restaurants, educational facilities, training centers, health clubs, Houses of Worship and businesses with higher than average ceilings. The 12E100-T60 100W 8-ohm driver features a frequency response of 43Hz-18.5kHz (+/-6dB) with an average sensitivity of 95dB and peak SPL of 115dB. The woofer is comprised of a 30 oz. magnet and 1.5-inch voice coil with a coaxially mounted, silk dome, horn-loaded tweeter with a 1-inch voice coil. The crossover frequency is 2kHz and the dispersion coverage is 95 degrees. Transformer is premounted and tapped at 60W (additional taps at 30W, 15W and 7.5W). Ttransformer may be bypassed by changing the jumper to the 8-ohm position. Overall weight: 10.2 lbs. Meets or exceeds all applicable EIA standards. Also available as part of complete speaker system (see MDX-series).